Trutite™ 919 Super Glue
| Inner Packaging | Outer Packaging |
| 30no | 150no |
General purpose
Low viscosity
10 – 20 secs. fixture time
Colourless and transparent
Offers fast bonding on a wide range of materials
TruTite 919 Super Glue
TruTite 919 is a transparent, colourless, low viscosity, general-purpose ethyl-based super glue offering fast bonding (5–20 seconds fixture time).
It is able to bond a wide range of materials, including most plastics, rubbers, and metals for instant repairs.
- General purpose
- Low viscosity
- 10 – 20 seconds fixture time
- Colourless and transparent
- Offers fast bonding on a wide range of materials
Production Information
| Application Method | Manual |
|---|---|
| Applications | ABS, Dense Hardwoods, Porcelain, Glass, Steel, Aluminium and Rubber |
| Colour | Clear |
| Cure Type | Moisture Cure |
| Fixture Time | 10 – 20 seconds |
| Gap Fill | 0.12 mm |
| Operating Temperature | -40°C to +120°C |
| Physical Form | Liquid |
| Shear Strength (Mild Steel) | 14.2 N/mm² (2060 psi) |
| Composition | Ethyl Cyanoacrylate, Hydroquinone |
| Viscosity | 20 – 60 mPa·s (cP) |
| Pack Size | 20 g |
| Full Strength Curing Time | 24 – 72 hours |
Directions for Use
Before use, read MSDS.
- All contact areas should be clean and free from grease and dirt. If necessary, clean all surfaces with a suitable solvent and allow to dry.
Skin contact should be avoided. It is recommended to use nitrile gloves (avoid latex), which may accelerate glue curing. - To improve bonding on low-energy plastic surfaces, a primer may be applied to the bond area.
Avoid applying excess primer and allow it to dry. - An activator may be used if necessary. Apply it to one of the contact surfaces
(do not apply activator to the primed surface where primer is also used). - Apply adhesive to one of the bond surfaces only (do not apply adhesive to the activated surface).
Do not use tissues or brushes to spread the adhesive. Apply drops directly from the container.
Join parts within a few seconds and position accurately, as the short fixture time allows very little adjustment. - Bonds should be held fixed or clamped until adhesive has bonded.
Approximately 60 seconds is usually sufficient. - Allow the product to develop full strength before subjecting to service loads
(typically 24–72 hours, depending on bond gap, materials, and ambient conditions). - When complete, affix the lid back onto the container and store in a cool, dry place.
Storage
Store product in the unopened container in a cool, dry location.
Optimal storage temperature: 10°C to 30°C.
Storage below 10°C or above 30°C may adversely affect product properties.
Material removed from containers may become contaminated during use and should not be returned to the original container.
Never use for repairing or bonding vessels that hold hot liquids.
Product life: 18 months from date of manufacture.
Technical Data Sheet
Product: TruTite 919 Super Glue
Version: 1.0
Date: 03/12/25
Plumbing and Heating Distribution Ltd reserves the right to alter or amend product data without prior notification.
Disclaimer
The information provided, including recommendations for use and application, is based on our knowledge and experience
of the TruTite 919 Super Glue product as at the date of this Technical Data Sheet.
The product may be used in multiple situations and under varying application and working conditions beyond our control.
Plumbing and Heating Distribution Ltd shall not be liable for results arising from such conditions or differing substrates.
We strongly recommend carrying out your own trials to confirm suitability for your intended application.
Any liability in respect of this data sheet or other written or oral recommendations is excluded.