TRUTITE™ 313 Thread Lock 250ml
| Inner Packaging | Outer Packaging |
| 6no | 36no |
TruTite™ 313 Thread Lock is designed for the instant assembly of threaded fasteners which if required can be disassembled with standard hand tools for maintenance or replacement purposes.
The product is an anaerobic thread locks which cures when oxygen is no longer present. This occurs when the air between your two metal fittings disperses which then allows the blue liquid to cure in a matter of minutes (please see curing times).
This process then forms a strong fitment which will prevent any loosening and leaks from vibrations caused to the fitment. TruTite™ 313 Thread Lock is most often used on Brass and Steel but is also effective on Stainless Steel, Aluminium and BZP Steel products
TruTite 313 Thread Lock Approvals
DIN EN 751-1 (Gas Approval)
BS 6920 (Water Approval)
Directions for use
Before use read TruTite™ 313 Thread Lock MSDS
Ensure all metal parts are clean and dry
Apply in one full rotation to male and female metal parts, use sparingly
Excess product will not dry, remove with cloth
To disassemble, use hand tools, if difficult to do so heat up to 250°C and repeat whilst hot can not be used on plastic fittings
Storage
Always keep in the original 50ml/ 250ml container
Store in a cool dry place, optimum storage temperature 22°C, avoid any direct sunlight
If product is kept at temperatures of less than 5°C or above 30°C this can negatively affect the performance of TruTite 313 Thread Lock
For expiry of product please see reverse of packaging, product life is 36 months from date of manufacture
Health and Safety
TruTite 313 Thread Lock contains methacrylate esters, for additional information read MSDS before use
